3D Scanning of the Pillars of a Wharf

Our Slam Scanner is now equipped with RTK module which is a significant factor in controlling drift when doing corridor mapping without the need to make loops in the capture path. The RTK module eliminates the need for GCPs for horizontal orientation.
Recently we completed a 3D scan of the underside pillars of a Wharf; 3D Scanning operation was done from the waterside on a JetSki while RTK module was connected to our Ntrip Base network via the in-built GSM modem. The trajectory of the scanner has been captured within 1-2 cm accuracy and there was no drift as expected.

We use state-of-the-art Technologies, fitting the scope of the job to save time and increase efficiency